Specifications
| Connector A | MTP Female |
| Connector B | MTP Female |
| Polish Type | UPC to UPC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM5 50/125μm |
| Wavelength | 850/1300nm |
| Fiber Count | 8, 12, 16, 24 Fibers |
| Polarity | Type A/B |
| Cable Outside Diameter (OD) | 3.0mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 7.5mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Connector Durability | 500 times |
| Tensile Strength | 80/240N (Long/Short Term) |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) |
| Return Loss | ≥27dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -10 to 70°C (14 to 158°F) |
Connectivity Solutions
40Gbps Connection:
The QSFP+ port of the switch is equipped with an 850nm optical module, using a 12-fiber MTP jumper cable with bidirectional transmission over single fiber, to meet 40G Ethernet access requirements.
100Gbps Connection:
The QSFP28 port of the switch is equipped with an 850nm optical module, using a 24-fiber MTP jumper cable to implement 100G backbone link aggregation.
200Gbps Connection:
The QSFP-DD port of the switch is equipped with a dual optical module, using a 24-fiber MTP jumper cable to achieve 200G ultra-high-speed transmission via wavelength division multiplexing (WDM).
Features
- MTP® UPC female to MTP® UPC female connector configuration
- Available in 8, 12, 16, and 24 fiber configurations
- Compliant with OM5 multimode fiber for high-speed data center applications
- Low insertion loss, up to 0.35 dB maximum
- Supports both Type A and Type B wiring configurations
- Lime green jacket for easy identification in high-density cabling systems
- Designed for 40G, 100G, 200G and 400G Ethernet transmission
- High-performance, reliable connectivity for switches, servers and patch panels
