MTP-16 to 2x MTP-8 OM4 Breakout Cable

This breakout cable is intended for multimode structured cabling where one 16-fiber link must be split into two 8-fiber links without adding a separate breakout cassette. It is suitable for high-density optical interconnect environments where fewer connection points, simpler cable management, and direct breakout connectivity are preferred.

The cable uses MTP-16 APC female on one end and 2x MTP-8 APC female on the other, with OM4 50/125μm multimode fiber, crossover polarity, 3.0 mm outer diameter, and 0.5 m breakout length. The listed optical performance includes 0.35 dB maximum insertion loss, 0.15 dB typical insertion loss, and return loss of at least 45 dB. The page also lists 850 nm and 1300 nm operating wavelengths, 7.5 mm minimum bend radius, and OFNP plenum jacket.

For data center buyers comparing breakout options, the main selection points usually include connector type, polarity, transceiver mapping, insertion loss, fiber type, jacket rating, and whether a direct breakout cable is more suitable than a cassette-based solution. This structure is especially useful when one 16-fiber multimode link needs to be split into two 8-fiber links in a compact cabling environment.

Key Features

• MTP-16 APC female to 2x MTP-8 APC female breakout structure
• OM4 50/125μm multimode fiber
• Crossover polarity for breakout mapping
• 0.35 dB maximum insertion loss
• Return loss of at least 45 dB
• OFNP plenum jacket
• 7.5 mm minimum bend radius
• Suitable for 400G to 2x200G optical breakout links

Product Description

This MTP-16 to 2x MTP-8 OM4 breakout cable is a practical choice for high-speed multimode links that require direct breakout connectivity without adding cassette hardware. In dense cabling systems, this can help reduce connection points and simplify link structure while keeping fiber mapping clear for transceiver breakout use.

The APC female connector format supports multimode breakout links where connector consistency and polarity accuracy are important. The listed magenta OFNP jacket matches standard OM4 identification and supports plenum installation requirements. For related multimode cabling applications, this cable can also be evaluated alongside multimode fiber patch cord products and optical fiber pages when comparing cable structure and routing requirements.

For projects building 400G to 2x200G links, this cable is suitable when the transceiver and polarity design require direct MTP-16 to dual MTP-8 connectivity. It is also suitable for multimode breakout architectures that require high-density routing and direct transceiver interconnection in data center environments.

Typical Applications

• 400G to 2x200G breakout links
• High-density multimode data center cabling
• MTP trunk to breakout interconnection
• Direct breakout alternative to cassette-based links
• Plenum-rated optical cabling environments

How to Choose the Right Breakout Cable

Choose this structure when the link requires one MTP-16 interface to break out into two MTP-8 interfaces.

Choose APC female connectors when the optical system and mating interfaces use APC connector geometry and the link design requires consistent polarity mapping.

Confirm crossover polarity before ordering so the cable matches the intended transceiver mapping and link architecture.

Confirm OFNP jacket requirement when the installation includes plenum spaces or building cabling areas that require plenum-rated fiber cable.

Technical Specifications

Connectivity and Deployment Notes

This cable is suitable for multimode breakout connectivity where one MTP-16 link is split into two MTP-8 links for direct transceiver interconnection. It is commonly used in 400G and 800G multimode cabling architectures where direct breakout is preferred over separate cassette-based deployment.

CTA

Looking for an MTP-16 to 2x MTP-8 OM4 breakout cable supplier for 400G to 2x200G links? Send us your connector type, polarity requirement, cable length, jacket requirement, and quantity. We will help match the suitable breakout cable configuration for your application and provide a quotation based on your project requirement.

FAQ

Which transceivers use MTP-16 to 2x MTP-8 OM4 breakout cable?

This cable is suitable for link structures that require one 16-fiber multimode interface to break out into two 8-fiber interfaces, including 400G and related high-speed multimode transceiver applications.

Is MTP-16 to 2x MTP-8 cable used for 400G to 2x200G breakout?

Yes. This structure is designed for 400G to 2x200G optical breakout links where one 16-fiber trunk is divided into two 8-fiber branches.

Should breakout cable or breakout cassette be used for 400G links?

A breakout cable is generally more suitable when direct connectivity, fewer connection points, and lower link complexity are preferred. A cassette may be more suitable when the cabling design requires modular patching architecture.

What polarity is required for MTP-16 to 2x MTP-8 OM4 breakout cable?

This product uses crossover polarity, so polarity should be confirmed against the intended transceiver mapping and link design before ordering.

Is APC or UPC more suitable for OM4 MTP breakout cable?

The connector format should match the link design and mating interfaces. For this product, the listed connector structure is APC female on both the MTP-16 side and the MTP-8 side, so ordering configuration should stay consistent with the intended connection architecture.