Span 30-50 FTTH Round Cable Plastic Clamp Tension 1.7 kN

The FTTH Round Cable Plastic Clamp is suitable for small-diameter round drop cables such as G657A1/A2. Its compact design supports single or double anchoring, making it a practical solution for FTTH last-mile cable deployment.

SPECIFICATIONS

Packing

Application

Designed to secure round FTTH drop cables with a diameter of 4–6 mm to utility poles, walls, or building facades.It is an ideal solution for establishing "pole-to-building" cable connections; with a tensile strength of 1.7 kN, it helps ensure that the cable remains securely tensioned and neatly anchored during outdoor installation.

Simple Installation for FTTH Round Cable Plastic Clamp

1.Install Clamp

• Take the cable and locate the approximate point to be installed in the @ clamp.
• Keep the bail of the clamp open.
• Place the tensioned line (span side) around the drum of the clamp using the A aperture located at the top of the clamp, as shown above.

2.Fix Clamp

• Complete 2 ½ turns around the drum of the clamp and exit the cable using the B aperture (shown above) located on the lower part of the clamp.
• Position the @ clamp on the pole fitting or wall / façade.
• Close and lock the bail of the clamp.

3.Tune Tension

• Adjust the tension in the cable by carrying out the following operations simultaneously.
• Push the cable on side A in the direction indicated above whilst pulling on the cable in the direction indicated on the side where the B aperture of the clamp is located.

4.Double anchoring

•  Leave a sufficient amount of slack in the cable at the back of the installed @ clamp.
• Then position the cable as before around the drum of the second clamp, this time starting with the B aperture.

5.Wind Secure

• Complete 2 ½ turns around the drum of the clamp, exiting the cable through the A aperture at the top of the clamp.
• Position the clamp on the pole fitting and close & lock the bail of the clamp.

6.Anchor Done

• Double anchoring complete.

FAQ

1.I am not sure if this clamp fits my cable. What should I check first?

You should check the cable shape, cable diameter, span length, installation location, and required tension strength. This clamp is a good choice for small round FTTH drop cables used in pole-to-building connections.You can also contact with us for recommendation.

2.What may happen if I choose the wrong clamp size?

If the clamp is too large for the cable, the cable may slip. If it is too tight, it may be hard to install or may stress the cable jacket. A correct size helps make the installation safer and cleaner.

3. Is this clamp difficult for installers to use on site?

Not really!The FTTH Round Cable Plastic Clamp can be installed quickly and manually without special tools. Contact us to get the installation video.

4. What hardware is this clamp compatible with?

It can be used with pole brackets, J hooks, wall brackets, and other FTTH accessories.

5.Can this product be used in coastal areas?

Yes! The plastic round clamp is made with UV-resistant.It resists humidity and corrosion very well. Our customers have given excellent feedback when using it in coastal areas.

6.  Does the clamp protect the fiber cable during installation?

Yes.The groove is designed to hold cables securely. It keeps the cable at a stable angle and protects it from damage.