Specifications
| Connector A | MTP Female |
| Connector B | MTP Female |
| Polish Type | APC to APC |
| Fiber Mode | OS2 9/125μm |
| Glass Fiber | G.657.A1 |
| Wavelength | 1310/1550nm |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) |
| Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Cable Outside Diameter (OD) | 3.0mm |
| Cable Jacket | Plenum (OFNP) |
| Minimum Bend Radius | 10mm |
| Trunk Length | 0.2m |
| Installation Tensile Load | 66N |
| Tensile Strength | 80/240N (Long/Short Term) |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -10 to 70°C (14 to 158°F) |
Connectivity Solutions
1. High-Density Infrastructure Migration
- Bridge 400G/200G high-density MTP-12 trunk ports to 100G/50G mid-density MTP-4 ports, avoiding full infrastructure replacement during network upgrades
- Ideal for leaf-spine architecture, connecting spine switches (MTP-12) to leaf switches or server adapters (MTP-4)
2. Bandwidth Segmentation
- Split a single 12-fiber MTP link into two independent 4-fiber MTP segments, supporting parallel 100G-PAM4 transmission per segment
- Enable granular bandwidth allocation for mixed-speed workloads (e.g., 200G spine to dual 100G leaf connections)
3. Polarity & Compatibility Management
- Type A/B polarity options ensure alignment with existing MTP trunk polarity, preventing signal misalignment
- Female/Male gender configurations match with MTP transceivers and patch panels, protecting connector pins from damage
- APC polishing ensures low return loss (≥ 65dB), critical for long-distance single-mode transmission
4. Data Center Cabling Optimization
- Yellow OS2 single-mode jacket for clear visual identification in multi-fiber environments
- Compact form factor maximizes rack space utilization, supporting high-density cabling in limited rack units
- Bend-insensitive fiber design minimizes signal loss in tight routing paths within server racks and cable management trays
Features
- Connector Configuration: MTP-12 APC (Female/Male) to 2×MTP-4 APC (Female/Male)
- Fiber Count: 8 Fibers (optimized for 2×4-fiber MTP segments)
- Fiber Type: OS2 single-mode fiber
- Insertion Loss: ≤ 0.35dB (Max.)
- Polarity: Type A / Type B
- Cable Color: Yellow
- Polishing Type: APC (Angled Physical Contact) for superior return loss performance
- Durability: Robust connector housing with strain relief, suitable for data center routing and repeated mating
- Factory-Terminated: Pre-assembled and factory-tested to ensure consistent performance and reduce on-site installation time
